5x PVC/Vinyl Repair Patch for Above Ground Swimming Pool: Intex BestWay EasySet

Description

BRAND NEW, UNUSED!
MOST TRUSTED BRAND!
A Permanent Solution to PVC/Vinyl Water and Air Products.
5 pieces of round Vinyl/PVC repair patches
Can be used to repair cuts and holes on inflatable above ground swimming pools and water toys.
Intex original material.
Waterproof material and works under air pressure.
ROUND PATCHES
Total of 5 (five) Pieces
Diameter: ~ 2.5", 6.35 cm
Color: Blue and White (Mosaic)
No Glue, Cement, or Adhesive Included! Patches Only!
You will need vinyl glue/cement in order to use these patches as intended!
Instructions
Deflate the product so the repair area is as flat as possible.
Clean and dry the area thoroughly where repair is to be made. Note: To allow better adhesion on flocked surfaces, apply some glue
(sold separately)
to the repair area and rub away the flocked texture until a smooth surface is exposed.
Use only enough liquid cement
(sold separately)
to wet the back to repair area. Note: Do not use too much cement, it will not seal properly.
Press the patch firmly on the repair area and hold temporarily.
If article is an inflatable, do not re-inflate for 12 hours.
Caution
Do not use near fire or flame.
Keep out of reach of children.
Disclaimer: Please make sure your inflatable is made of PVC/Vinyl material otherwise this patch and glue kit won't work! This item is NOT for Hypalon materials or bike products.
Satisfaction guaranteed. Return for any reason if you're not satisfied and your money back.
Usually ships same day or within one business day after payment received.
Ships via USPS first-class from California, USA.
Important: If you have a special request, please contact us before placing your order and make sure we would be able to fulfill it. We cannot guarantee to honor any request sent via messages attached to the order or after the order has been placed.