-40%
Outdoor Pool Towel Drying and Pool Float Storage Rack
$ 152.59
- Description
- Size Guide
Description
For more details and accessories go to www.outdoorhabitation.comSustainable, modern, architectural, outdoor pool towel rack and pool float or noodle storage. This beautifully designed redwood pool rack has four crossbars for multiple towels and can work for even the largest families. No more towels thrown over the lounge chairs or on the pool deck to dry. The small 6" bars on the sides can even be used to hang wet bikinis or additional hooks can be ordered at the website below. This rack is handmade using clear redwood and stainless steel screws and has four crossbars. All holes are pre-drilled for easy assembly and, if needed, disassembly. Redwood is known to be one of the best woods for use outdoors. 39” x 24” x 37.5”
For more details and accessories go to www.outdoorhabitation.com
WOOD: The standard towel rack is Redwood. Redwood has natural blonde and red appearance that is unlike any other wood as you can see in the photos. If you are looking for a uniform look, it is recommended you select the raw redwood version and stain and clear coat the unit yourself. However, we also offer an Ipe "exotic" hardwood version. Note, while Ipe is one of the most dense woods on earth and can last for 75 years, it is EXTREMELY heavy and expensive. If your heart is set on Ipe wood construction, please let us know and we can let you know the cost as well as the shipping cost. If you are in the Malibu/Los Angeles area, we can make other arrangements as well.
We currently offer two standard variations:
1. Raw Redwood (no extra charge) - allowing you to stain/seal yourself. This option should not be used unless you plan to stain and seal yourself.
2. Clear-coated Redwood (extra charge) - protecting and sealing the Redwood but maintaining the natural color of the wood. Like all outdoor wood products, it is recommended that clear coat be applied annually.
POOL FLOAT AND NOODLE STORAGE:
Each slot is 6” deep. The middle slot is Designed for foam pool floats Of between 1” to 4” thickness and that are no more than 28” wide. Please ask first for any needed customizations at additional cost that go beyond these thresholds.
ASSEMBLY: Assembly in 20 min or less. All holes are pre-drilled. Typically, we use Phillips screwdriver bit stainless steel screws. Simple, easy to follow instructions are provided.
Custom sizes and stains are available at additional cost but may take longer to deliver depending on the modification. Just message us to discuss.
We do not accept returns but if you have any concerns regarding your order please reach out to us. All taxes and customs duties are the responsibility of buyer.