Pool Outdoor WaterProof LED Tape Lighting Strip SMD 3528 300 LEDs 20/ft RED

Description

This listing includes the Red 100 lumen per foot strip length that you selected form the drop box above as well as the appropriate
POWER SUPPLY which plugs directly into a wall outlet. Power Supplies are different for different lengths. The longer the strip, the larger the power supply.
Once you get longer than 40 ft there will be a large power supply that will require you to go both directions from the power to get the full length
( ---------LEDs----------power-----------LEDs----------- ).  This means you can go both ways from the power and meet in the middle on the other side of the pool or anything else you are lighting.
Overview
Create your own custom lighting with LED tape strips. Pre-applied 3M adhesive attaches to almost any surface and the sealed design is impact resistant. This single color Red LED strip can be cut to custom lengths. Simply cut and go.
Once applying, you just plug in the stripand you are ready to go.
** Strips can be connected to each other if you need longer.
Highlights
Waterproof... See waterproofing details below.
Longer life (50,000 hours) and much lower power consumption compared to rope lights or any other lighting
Cut lines on circuit board for creating miniature segments
Impact resistant to use anywhere with 3M adhesive backing
Great for use as holiday lighting, indoor accent lighting, indirect lighting... even in automotive applications!
FOR WATERPROOF STRIPS
Waterproof Strips are silicone filled to protect the LEDs from water all along the top and sides of the strip. To fully protect the strip long term you will need to run a bead of silicone along both sides of the strip and all around any connection, plug and both ends of the strip. If you do not do this there is risk of the LEDs shorting out. Being a 12V light there is no safety issue. This suggestion is simply to protect your LEDs long term.
Why buy MY LEDs??
1. The board color.
Instead of "yellow board" my LEDs are on a much nicer and more durable white board with an oil brushed surface.
The wire running through this is 100% copper instead cheap short lasting iron as most LED strips are.
2.the board material quality.
"A" is my LED strip with two layer board completely resistant to heat and protected from short circuiting. (Very Common for cheap LED strips)
3. Silicone Filled NOT Epoxy (for Waterproof Only)
Waterproof Strips are filled with Real Silicone instead of epoxy glue that becomes yellow and faded over time.  The real Silicone is also the only way ensure a consistent color temperature over time.
4. Chip Connection
My LEDs have gold thread running through to connect each LED and chip together rather than copper thread. This will ensure a long lasting connection for LED to chip.
LED strip lights can be used for many applications such as:
Accent lighting
signage
under cabinet lighting
cove lighting
bar top lighting
club lights
TV backlighting
under counter lighting
task lighting
cabinet lighting
display case lighting
and more!
>
"For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life."
John 3:16 ESV