-40%
Sherline #1 Morse Drill Chuck 1010

Sherline #1 Morse Drill Chuck 1010

$ 39.57

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Brand: Sherline
  • Item must be returned within: 30 Days
  • Condition: New
  • Restocking Fee: No
  • California Prop 65 Warning: WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection
  • Model: 1010
  • Suitable For: Metal
  • Type: Lathes Accessories
  • Country/Region of Manufacture: United States
  • Refund will be given as: Money Back

    Description

    Sherline #1 Morse Drill Chuck 1010
    A chuck key plus a drawbolt and washer are included with P/N 1010 to secure the chuck in position. These chucks are useful for holding very small drills and their shorter length provides an increase of about 1/2" in working space between centers on the shortbed lathe compared to the 1/4" drill chuck. Runout as specified by Jacobs is .004" or less.
    NOTE: Because the arbor is pressed into the chuck, it is not interchangeable from chuck to chuck. A separate chuck must be purchased for #0 and #1 Morse use.
    The 5/32" chuck holds drills from 5/32" (4mm) down to #80 (.0135" or .343mm). It is designated "0JT" which stands for "Zero Jacobs Taper". This chuck comes with a #0 Jacobs tapered hole in the back. Into that Sherline has pressed a special arbor that provides either a #1 Morse taper to fit into the Sherline headstock or a #0 Morse taper to fit the tailstock.