Waterway 1HP Spa Hot Tub Pump Impeller Hi-Flo Wet End 48 Frame Part

Description

You are Buying
a
1 HorsePower Impeller for an Hi-Flo 48 Frame Wet End.
HI-Flos are 48 Frame Only therefore if you have a 56 frame motor this is not your part. This Impellor fits between the Face and the Volute of an Hi-Flo Wet End and Usually requires a Seal when you replace the Impeller. We offer a Seal individually or a Seal & Impeller Kit look in our store for the kit. The Purpose of this part is to move the water inside the Wet End. This part is (1) Impeller only.
Visit our eBay Store as we also offer these and other associated products and accessories for your Spa.
Note: A 115v motor that uses a 1 HP Impeller would show about 11-12.0 Amps on high speed a 230V motor would show about 8.0 Amps on High. See chart below for other Horsepowers.
Do Not choose a Larger Impeller thinking that it will make your Hot Tub Stronger it will only damage the Motor and make it run hot on high speed.
To determine the HP refer to the chart below..
The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts.
The 48 Frame will be 3 5/8" between or 5 3/16" in a X Pattern and the 56 Frame will be 4 1/8" Between or 5 3/4" in a X Pattern.
You must go by the Amperage Sticker on the motor not stickers on the Wet End or Motor especially the BHP Stickers.
Look on the label of the motor for the two amperages if you have a 2 speed pump or if its a single speed look for a single amperage. An example will look something like this:
10.0/3.5
The 10.0 is the high amperage in this example.
115V Chart Below
3/4HP 8-9 Amps
1HP 11-12 Amps
1.5HP 16-17 Amps
2HP 19-20 Amps. 2HP would be very rare
.
230V Chart Below
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
NOTE: Your pump or motor may say a different Horse Power than what you see here,
DO NOT
go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told incorrectly that they have 5 HP pumps.
If you do the math two 230V 5 HP pumps at 16 amps is: 32 amps.
Plus a 5.5 KW heater is:
+ 21 amps.
That means with both pumps running and the heater on it will draw  = 53 AMPS.
I bet your HOT TUB is on a 50 AMP breaker…... Therefore contrary to what you have been told you
DO NOT
have a 5 or 6 or 7 Hp pump.
Shipping in The United States is Free. I Ship International Through the Global Shipping Program Only!!
ASP 310-4000, 310-3990, 310-3980, 313-1520, 313-1440
Please Choose with Care as We Do Not Accept Returns.
We have done a lot of extra work with videos and pictures to prevent you from choosing the wrong part..